3D printing with coffee: Turning used grounds into caffeinated creations
Coffee can do a lot of things: Wake you up, warm you up and lessen that existential dread. According to a new study, it could also help reduce the waste from 3D printing.
A pendant, espresso cups and flower planters 3D printed from used coffee grounds.
Michael Rivera
That’s the vision behind a new project led by Michael Rivera, an assistant professor in the ATLAS Institute and Department of Computer Science at the University of Colorado Boulder. He and his colleagues have developed a method for 3D printing a wide range of objects using a paste made entirely out of old coffee grounds, water and a few other sustainable ingredients.
The team has already experimented with using coffee grounds to craft jewelry, pots for plants and even, fittingly, espresso cups. The technique is also simple enough that it will work, with some modifications, on most low-cost, consumer-grade 3D printers.
“You can make a lot of things with coffee grounds,” Rivera said. “And when you don’t want it anymore, you can throw it back into a coffee grinder and use the grounds to print again.”
The group presented its findings this summer at the Association for Computing Machinery’s Designing Interactive Systems conference in Pittsburgh.
For Rivera, the project is part of his mission to make 3D printing more sustainable—allowing artists, designers, engineers and more to quickly make graspable prototypes and other household objects without adding to landfills.
“Our vision is that you could just pick up a few things at a supermarket and online and get going,” Rivera said.
Good ideas come from caffeine
That vision predictably began in a coffee shop.
When Rivera was a graduate student at Carnegie Mellon University, he often worked out of a café in Pittsburgh called Arriviste Coffee Roasters. The coffee shop contracted with a local group to pick up its used coffee grounds for composting, but during the COVID-19 pandemic, that wasn’t possible. The waste began to pile up.
“The owner told me, ‘I don’t know what to do with it. So I just throw it away,’” said Rivera, who joined CU Boulder as a postdoctoral researcher in 2022. “I looked at the grounds and said, ‘Maybe I can do something with them.’”
Rivera explained that most consumer 3D printers on the market today print with thermoplastics of some kind. The most common is polylactic acid, or PLA. This material is, theoretically, compostable, but only a fraction of composting facilities will accept it.
“If you throw it in a landfill, which is where the majority of PLA ends up, it will take up to 1,000 years to decompose,” Rivera said.
He realized he could solve several problems at the same time: Reduce plastic waste, find something to do with all those used grounds and enjoy some warm cups of coffee in the process.
Grounds for celebration
The team’s method is pretty simple, Rivera noted: He and his colleagues mix dried coffee grounds with two other powders that they buy online: cellulose gum and xanthan gum. Both are common additives in food and degrade easily in a compost bin. Next, the researchers mix in water.
“You're pretty much shooting for the consistency of peanut butter,” Rivera said.
You can’t load that ooze directly into a 3D printer. First, Rivera does a little jury-rigging, modifying a printer with plastic tubes and a syringe filled with coffee paste. But the group’s creations are surprisingly hardy. When dried, the coffee grounds material is about as tough as unreinforced concrete.
“We’ve made objects with a ton of usage,” Rivera said. “We’ve dropped them, and they haven’t broken yet.”
He sees a lot of potential for turning coffee grounds into tangible objects. Rivera, for example, has made small planters out of coffee grounds, which can be used to grow seedlings for acid-loving plants like tomatoes. Once the plants get tall enough, you can plant them, pot and all, in the soil. The team can also add activated charcoal to its grounds to make parts that can conduct electricity, such as buttons for sustainable electronics.
Rivera noted that printing with coffee grounds may never become a widespread practice. Instead, he sees the project as a step toward discovering other kinds of sustainable 3D printing materials that could, one day, replace plastics.
As it turns out, you really can achieve anything with coffee.
Original publication
Other news from the department science
Get the food & beverage industry in your inbox
From now on, don't miss a thing: Our newsletter for the food & beverage sector brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
Most read news
More news from our other portals
Possible trigger of Crohn’s disease discovered
Dysfunctional mitochondria disrupt the gut microbiome
Cost-effective modular system for optical imaging from the 3D printer
Like building with Lego bricks
